Amish made hardwood

It is currently Thu Mar 28, 2024 2:51 pm

All times are UTC - 5 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Advice for applying Monocoat??
PostPosted: Thu Jun 13, 2013 6:26 pm 
Offline
Worthy Contributor

Joined: Mon Jun 13, 2011 7:36 pm
Posts: 115
Location: Spencer, TN
Hey Guys, I haven't visited the site in a while, it's nice to see that most of you are still here giving good pointers.

So, I have a question-- I am about to try my first penetrating oil application, I believe the customer has chosen Rubio Monocoat. The flooring is to be Red Oak, with a mixed grade/ euro style installation. I am familiar with oil and water base finish applications, but would really appreciate some advice on how this stuff works.
I have been told to rub it in around walls, then buff into the rest of the floors. My questions are: how much do I apply? What type of buffing pad will I need? Do I just smear it on the wood and buff it into the floor? Can it be applied over stain? Do I only apply one coat?
As I said, I am very unfamiliar with this stuff, and would greatly appreciate any advice I can get.
Thanks in advance.


Top
 Profile E-mail  
 
Amish made hardwood

 Post subject: Re: Advice for applying Monocoat??
PostPosted: Fri Jun 14, 2013 10:53 pm 
Offline
Valued Contributor

Joined: Mon Mar 14, 2011 4:36 pm
Posts: 705
your best advice will come from th makers...visit them on Facebook if you need to..its not that hard..buff it in for a while..wipe away excess..

_________________
James Hernandez
All Flortec Inc, West Milford, NJ

http://www.flortechardwood.net


Top
 Profile E-mail  
 
 Post subject: Re: Advice for applying Monocoat??
PostPosted: Wed Apr 02, 2014 1:21 pm 
Offline
New User

Joined: Wed Apr 02, 2014 12:17 pm
Posts: 1
http://www.rubioapp.com/ Follow the instructions here and you will be amazed at just how simple it is and don't worry about overlap or the different sections not blending because they will. Remember this is a penetrating finish not a top coat finish so remove all excess while applying.


Top
 Profile E-mail  
 
 Post subject: Re: Advice for applying Monocoat??
PostPosted: Wed Apr 02, 2014 7:19 pm 
Offline
Prized Contributor

Joined: Sat May 02, 2009 3:45 pm
Posts: 3357
Location: Tucson AZ
Its super easy. I wish I could work with it all the time.

_________________
Stephen Perrera
Top Floor Installation Co.
Tucson, Arizona
IFCII Certified Inspector
Floor Repairs and Installation in Tucson, Az
http://www.tucsonazflooring.com


Top
 Profile E-mail  
 
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

phpBB SEO