I just put on a coat of Bona DriFast Sealer.

Is it still a little tacky when dry? It's been over two hours and moderat humidity, about 70-75 degrees out with lots of airflow/ventilation.

Big question though. The can says to abrade surface with 180-220 then apply finish. The guy at flooring supplier said I could apply first coat of Bona Woodline over top without abrasion if I did it within a day.

Is that true or do I need to abrade it? I was going to abrade between the first application of Woodline and second.

Thanks!

Josh

I have not b een a fan of "hot coating". The second coat will etch into the coat below with out any need for abrasion within a certain amount of time.